The ground loading trailer is a simple flatdbed trailer that has the convenience of having a deck that lowers to the ground for quick, safe and easy loading of motorcycles, 4 wheel bikes, jetskis, furniture or just about anything that requires roll on/roll off loading.
Release the locking latch, unwind the winch and the rear end of the trailer lowers to the ground. On level ground the deck incline is a very shallow 6 degrees, and with the choice of either a fixed or hinging rear ramp, loading this trailer is a breeze!
The trailer has a tare weight of around 705 lbs and with a 2200 lb GVM (Gross Vehicle Mass) can take a load of up to 1495 lb. These plans include the fitting of hydraulic override/surge disc brakes with reference to non braking if required.
The deck is 2.85m (9ft 4 1/2") long and 1.5m (5ft) wide with rear corner platforms for ease of access to the trailer and its load.
With quick fit accessory pockets positioned around the trailer, a multitude of accessories can be fitted quickly and easily.
Whether you need to convert from a 3 bike motorcycle rack to sides for moving some blocks or soil, or from moving your ride on mower to launching your jet ski, a couple of turns of the spanner and you effectively have a built for purpose multi tasking trailer!
Click here to start building your own Ground Loading Trailer - here at Trailersauce, we would love to see your trailer, send us your photos and as always, any feedback is welcome!
Please note that the plans are dimensioned in metric including all steel section. If building with US dimensioned steel, always upsize steel hollow sections - never downsize! Be aware that the tare weight of the trailer will increase slightly.